Becker revo.2 Betriebsanleitung PDF herunterladen (Seite 24)

>>> GENERAL OPERATION

> D

> GB

> F

> I

> PL

Adjusting the unit holder’s position

> Loosen the fastening screws a

until the carrier plate can be moved

without using excessive force.

> Move the carrier plate to the

required position and hold it in this

position.

> Tighten the fastening screws and

sufficiently so that the Navigation

device is held securely in place when

the vehicle is in motion.

Mounting the navigation device

> Hang the display on the upper hook of

the mounting bracket

> Move the display downwards, it will

then be mounted by the magnetic

mounting bracket

Removing navigation device

> Remove the display carefully down

from the mounting bracket

> Move the display approx. 45° upwards,

and lift it slightly.

Switching the Navigation device

on/off (model dependent)

With the ON/OFF switch (I/O) you can

switch the Navigation device on or off

completely.

With the button on the upper side of

the Navigation device you can switch the

device to sleep mode or switch it from

sleep mode again.

For devices without the button on the

underside (model dependent): With the

button you can switch the device off,

on or to the sleep mode.

Note:

The device is woken from the sleep

mode once the display is mounted.

Note:

The device will go into sleep mode when

the display is removed in the switched-

on state.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 154 155

Kommentare zu diesen Handbüchern

Keine Kommentare

Becker revo.2 Betriebsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Becker revo.2